share page Peavey PR-12D Powered Loud Speaker 12 Inch 2-Way (Item # PR-12D)

PR 12D

The Peavey PR 12D is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PR 12D is capable of up to 120 dB peak SPL. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system. This two-way powered system is comprised of a 150 W class D power amplifier driving a 12" heavy duty woofer. The RX™14 compression driver is driven by a 50 W class D power amplifier and features a 1.4” titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90° by 40°) that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4” TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4” phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input.

A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. Constant Loudness (Fletcher-Munson) circuit for accenuating bass and treble at low listening volume levels. The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature our patented DDT™ compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount™ allow maximum utility.

Features:

• Bi-amplified powered system with 200 watts maximum output
• Both power amps have DDT(TM) compression
• One 12" neodymium, 2.375" voice coil woofer
• Woofer servo
• RX(TM) 14 1.4" titanium compression driver
• Automatic equal loudness (Fletcher-Munson) compensation
• Combo jack with 1/4" TRS & female XLR mic or line-level balanced input
• Two 1/4" phone jack inputs for link-out/ link-in capability
• Molded-in horn has exceptionally smooth response & pattern control
• Top & side handgrips
• Pole mount molded-in
• Top & bottom flyng point inserts